expat.h

/* Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd
   See the file COPYING for copying permission.
*/

#ifndef XmlParse_INCLUDED
#define XmlParse_INCLUDED 1

#ifdef __VMS
/*      0        1         2         3      0        1         2         3
        1234567890123456789012345678901     1234567890123456789012345678901 */
#define XML_SetProcessingInstructionHandler XML_SetProcessingInstrHandler   
#define XML_SetUnparsedEntityDeclHandler    XML_SetUnparsedEntDeclHandler   
#define XML_SetStartNamespaceDeclHandler    XML_SetStartNamespcDeclHandler  
#define XML_SetExternalEntityRefHandlerArg  XML_SetExternalEntRefHandlerArg 
#endif

#include <stdlib.h>

#ifndef XMLPARSEAPI
#if defined(_MSC_EXTENSIONS) && !defined(__BEOS__) && !defined(__CYGWIN__) && !defined(UNDER_CE)
#ifdef _STATIC
#define XMLPARSEAPI(type) type __cdecl
#else
#define XMLPARSEAPI(type) __declspec(dllimport) type __cdecl
#endif
#else
#define XMLPARSEAPI(type) type
#endif
#endif  /* not defined XMLPARSEAPI */

#ifdef __cplusplus
extern "C" {
#endif

#ifdef _UNICODE
#ifndef XML_UNICODE_WCHAR_T
#define XML_UNICODE_WCHAR_T
#endif
#ifndef XML_UNICODE
#define XML_UNICODE
#endif
#endif

#ifdef XML_UNICODE_WCHAR_T 
#define XML_UNICODE
#endif

struct XML_ParserStruct;
typedef struct XML_ParserStruct *XML_Parser;

#ifdef XML_UNICODE     /* Information is UTF-16 encoded. */
#ifdef XML_UNICODE_WCHAR_T
typedef wchar_t XML_Char;
typedef wchar_t XML_LChar;
#else
typedef unsigned short XML_Char;
typedef char XML_LChar;
#endif /* XML_UNICODE_WCHAR_T */
#else                  /* Information is UTF-8 encoded. */
typedef char XML_Char;
typedef char XML_LChar;
#endif /* XML_UNICODE */

/* Should this be defined using stdbool.h when C99 is available? */
typedef unsigned char XML_Bool;
#define XML_TRUE   ((XML_Bool) 1)
#define XML_FALSE  ((XML_Bool) 0)

enum XML_Error {
  XML_ERROR_NONE,
  XML_ERROR_NO_MEMORY,
  XML_ERROR_SYNTAX,
  XML_ERROR_NO_ELEMENTS,
  XML_ERROR_INVALID_TOKEN,
  XML_ERROR_UNCLOSED_TOKEN,
  XML_ERROR_PARTIAL_CHAR,
  XML_ERROR_TAG_MISMATCH,
  XML_ERROR_DUPLICATE_ATTRIBUTE,
  XML_ERROR_JUNK_AFTER_DOC_ELEMENT,
  XML_ERROR_PARAM_ENTITY_REF,
  XML_ERROR_UNDEFINED_ENTITY,
  XML_ERROR_RECURSIVE_ENTITY_REF,
  XML_ERROR_ASYNC_ENTITY,
  XML_ERROR_BAD_CHAR_REF,
  XML_ERROR_BINARY_ENTITY_REF,
  XML_ERROR_ATTRIBUTE_EXTERNAL_ENTITY_REF,
  XML_ERROR_MISPLACED_XML_PI,
  XML_ERROR_UNKNOWN_ENCODING,
  XML_ERROR_INCORRECT_ENCODING,
  XML_ERROR_UNCLOSED_CDATA_SECTION,
  XML_ERROR_EXTERNAL_ENTITY_HANDLING,
  XML_ERROR_NOT_STANDALONE,
  XML_ERROR_UNEXPECTED_STATE,
  XML_ERROR_ENTITY_DECLARED_IN_PE,
  XML_ERROR_FEATURE_REQUIRES_XML_DTD,
  XML_ERROR_CANT_CHANGE_FEATURE_ONCE_PARSING
};

enum XML_Content_Type {
  XML_CTYPE_EMPTY = 1,
  XML_CTYPE_ANY,
  XML_CTYPE_MIXED,
  XML_CTYPE_NAME,
  XML_CTYPE_CHOICE,
  XML_CTYPE_SEQ
};

enum XML_Content_Quant {
  XML_CQUANT_NONE,
  XML_CQUANT_OPT,
  XML_CQUANT_REP,
  XML_CQUANT_PLUS
};

/* If type == XML_CTYPE_EMPTY or XML_CTYPE_ANY, then quant will be
   XML_CQUANT_NONE, and the other fields will be zero or NULL.
   If type == XML_CTYPE_MIXED, then quant will be NONE or REP and
   numchildren will contain number of elements that may be mixed in
   and children point to an array of XML_Content cells that will be
   all of XML_CTYPE_NAME type with no quantification.

   If type == XML_CTYPE_NAME, then the name points to the name, and
   the numchildren field will be zero and children will be NULL. The
   quant fields indicates any quantifiers placed on the name.

   CHOICE and SEQ will have name NULL, the number of children in
   numchildren and children will point, recursively, to an array
   of XML_Content cells.

   The EMPTY, ANY, and MIXED types will only occur at top level.
*/

typedef struct XML_cp XML_Content;

struct XML_cp {
  enum XML_Content_Type         type;
  enum XML_Content_Quant        quant;
  XML_Char *                    name;
  unsigned int                  numchildren;
  XML_Content *                 children;
};


/* This is called for an element declaration. See above for
   description of the model argument. It's the caller's responsibility
   to free model when finished with it.
*/
typedef void (*XML_ElementDeclHandler) (void *userData,
                                        const XML_Char *name,
                                        XML_Content *model);

XMLPARSEAPI(void)
XML_SetElementDeclHandler(XML_Parser parser,
                          XML_ElementDeclHandler eldecl);

/* The Attlist declaration handler is called for *each* attribute. So
   a single Attlist declaration with multiple attributes declared will
   generate multiple calls to this handler. The "default" parameter
   may be NULL in the case of the "#IMPLIED" or "#REQUIRED"
   keyword. The "isrequired" parameter will be true and the default
   value will be NULL in the case of "#REQUIRED". If "isrequired" is
   true and default is non-NULL, then this is a "#FIXED" default.
*/
typedef void (*XML_AttlistDeclHandler) (void           *userData,
                                        const XML_Char *elname,
                                        const XML_Char *attname,
                                        const XML_Char *att_type,
                                        const XML_Char *dflt,
                                        int             isrequired);

XMLPARSEAPI(void)
XML_SetAttlistDeclHandler(XML_Parser parser,
                          XML_AttlistDeclHandler attdecl);

/* The XML declaration handler is called for *both* XML declarations
   and text declarations. The way to distinguish is that the version
   parameter will be NULL for text declarations. The encoding
   parameter may be NULL for XML declarations. The standalone
   parameter will be -1, 0, or 1 indicating respectively that there
   was no standalone parameter in the declaration, that it was given
   as no, or that it was given as yes.
*/
typedef void (*XML_XmlDeclHandler) (void                *userData,
                                    const XML_Char      *version,
                                    const XML_Char      *encoding,
                                    int                  standalone);

XMLPARSEAPI(void)
XML_SetXmlDeclHandler(XML_Parser parser,
                      XML_XmlDeclHandler xmldecl);


typedef struct {
#ifdef __SYMBIAN32__
  void *(*malloc_fcn)(size_t size);
  void *(*realloc_fcn)(void *ptr, size_t size);
  void (*free_fcn)(void *ptr);
#else
  void *(__cdecl *malloc_fcn)(size_t size);
  void *(__cdecl *realloc_fcn)(void *ptr, size_t size);
  void (__cdecl *free_fcn)(void *ptr);
#endif
} XML_Memory_Handling_Suite;

/* Constructs a new parser; encoding is the encoding specified by the
   external protocol or NULL if there is none specified.
*/
XMLPARSEAPI(XML_Parser)
XML_ParserCreate(const XML_Char *encoding);

/* Constructs a new parser and namespace processor.  Element type
   names and attribute names that belong to a namespace will be
   expanded; unprefixed attribute names are never expanded; unprefixed
   element type names are expanded only if there is a default
   namespace. The expanded name is the concatenation of the namespace
   URI, the namespace separator character, and the local part of the
   name.  If the namespace separator is '\0' then the namespace URI
   and the local part will be concatenated without any separator.
   When a namespace is not declared, the name and prefix will be
   passed through without expansion.
*/
XMLPARSEAPI(XML_Parser)
XML_ParserCreateNS(const XML_Char *encoding, XML_Char namespaceSeparator);


/* Constructs a new parser using the memory management suit referred to
   by memsuite. If memsuite is NULL, then use the standard library memory
   suite. If namespaceSeparator is non-NULL it creates a parser with
   namespace processing as described above. The character pointed at
   will serve as the namespace separator.

   All further memory operations used for the created parser will come from
   the given suite.
*/
XMLPARSEAPI(XML_Parser)
XML_ParserCreate_MM(const XML_Char *encoding,
                    const XML_Memory_Handling_Suite *memsuite,
                    const XML_Char *namespaceSeparator);

/* Prepare a parser object to be re-used.  This is particularly
   valuable when memory allocation overhead is disproportionatly high,
   such as when a large number of small documnents need to be parsed.
   All handlers are cleared from the parser, except for the 
   unknownEncodingHandler. The parser's external state is re-initialized
   except for the values of ns and ns_triplets.

   Added in Expat 1.95.3.
*/
XMLPARSEAPI(XML_Bool)
XML_ParserReset(XML_Parser parser, const XML_Char *encoding);

/* atts is array of name/value pairs, terminated by 0;
   names and values are 0 terminated.
*/
typedef void (*XML_StartElementHandler)(void *userData,
                                        const XML_Char *name,
                                        const XML_Char **atts);

typedef void (*XML_EndElementHandler)(void *userData,
                                      const XML_Char *name);


/* s is not 0 terminated. */
typedef void (*XML_CharacterDataHandler)(void *userData,
                                         const XML_Char *s,
                                         int len);

/* target and data are 0 terminated */
typedef void (*XML_ProcessingInstructionHandler)(void *userData,
                                                 const XML_Char *target,
                                                 const XML_Char *data);

/* data is 0 terminated */
typedef void (*XML_CommentHandler)(void *userData, const XML_Char *data);

typedef void (*XML_StartCdataSectionHandler)(void *userData);
typedef void (*XML_EndCdataSectionHandler)(void *userData);

/* This is called for any characters in the XML document for which
   there is no applicable handler.  This includes both characters that
   are part of markup which is of a kind that is not reported
   (comments, markup declarations), or characters that are part of a
   construct which could be reported but for which no handler has been
   supplied. The characters are passed exactly as they were in the XML
   document except that they will be encoded in UTF-8 or UTF-16. 
   Line boundaries are not normalized. Note that a byte order mark
   character is not passed to the default handler. There are no
   guarantees about how characters are divided between calls to the
   default handler: for example, a comment might be split between
   multiple calls.
*/
typedef void (*XML_DefaultHandler)(void *userData,
                                   const XML_Char *s,
                                   int len);

/* This is called for the start of the DOCTYPE declaration, before
   any DTD or internal subset is parsed.
*/
typedef void (*XML_StartDoctypeDeclHandler)(void *userData,
                                            const XML_Char *doctypeName,
                                            const XML_Char *sysid,
                                            const XML_Char *pubid,
                                            int has_internal_subset);

/* This is called for the start of the DOCTYPE declaration when the
   closing > is encountered, but after processing any external
   subset.
*/
typedef void (*XML_EndDoctypeDeclHandler)(void *userData);

/* This is called for entity declarations. The is_parameter_entity
   argument will be non-zero if the entity is a parameter entity, zero
   otherwise.

   For internal entities (<!ENTITY foo "bar">), value will
   be non-NULL and systemId, publicID, and notationName will be NULL.
   The value string is NOT nul-terminated; the length is provided in
   the value_length argument. Since it is legal to have zero-length
   values, do not use this argument to test for internal entities.

   For external entities, value will be NULL and systemId will be
   non-NULL. The publicId argument will be NULL unless a public
   identifier was provided. The notationName argument will have a
   non-NULL value only for unparsed entity declarations.

   Note that is_parameter_entity can't be changed to XML_Bool, since
   that would break binary compatibility.
*/
typedef void (*XML_EntityDeclHandler) (void *userData,
                                       const XML_Char *entityName,
                                       int is_parameter_entity,
                                       const XML_Char *value,
                                       int value_length,
                                       const XML_Char *base,
                                       const XML_Char *systemId,
                                       const XML_Char *publicId,
                                       const XML_Char *notationName);
                                       
XMLPARSEAPI(void)
XML_SetEntityDeclHandler(XML_Parser parser,
                         XML_EntityDeclHandler handler);

/* OBSOLETE -- OBSOLETE -- OBSOLETE
   This handler has been superceded by the EntityDeclHandler above.
   It is provided here for backward compatibility.

   This is called for a declaration of an unparsed (NDATA) entity.
   The base argument is whatever was set by XML_SetBase. The
   entityName, systemId and notationName arguments will never be
   NULL. The other arguments may be.
*/
typedef void (*XML_UnparsedEntityDeclHandler)(void *userData,
                                              const XML_Char *entityName,
                                              const XML_Char *base,
                                              const XML_Char *systemId,
                                              const XML_Char *publicId,
                                              const XML_Char *notationName);

/* This is called for a declaration of notation.  The base argument is
   whatever was set by XML_SetBase. The notationName will never be
   NULL.  The other arguments can be.
*/
typedef void (*XML_NotationDeclHandler)(void *userData,
                                        const XML_Char *notationName,
                                        const XML_Char *base,
                                        const XML_Char *systemId,
                                        const XML_Char *publicId);

/* When namespace processing is enabled, these are called once for
   each namespace declaration. The call to the start and end element
   handlers occur between the calls to the start and end namespace
   declaration handlers. For an xmlns attribute, prefix will be
   NULL.  For an xmlns="" attribute, uri will be NULL.
*/
typedef void (*XML_StartNamespaceDeclHandler)(void *userData,
                                              const XML_Char *prefix,
                                              const XML_Char *uri);

typedef void (*XML_EndNamespaceDeclHandler)(void *userData,
                                            const XML_Char *prefix);

/* This is called if the document is not standalone, that is, it has an
   external subset or a reference to a parameter entity, but does not
   have standalone="yes". If this handler returns 0, then processing
   will not continue, and the parser will return a
   XML_ERROR_NOT_STANDALONE error.
   If parameter entity parsing is enabled, then in addition to the
   conditions above this handler will only be called if the referenced
   entity was actually read.
*/
typedef int (*XML_NotStandaloneHandler)(void *userData);

/* This is called for a reference to an external parsed general
   entity.  The referenced entity is not automatically parsed.  The
   application can parse it immediately or later using
   XML_ExternalEntityParserCreate.

   The parser argument is the parser parsing the entity containing the
   reference; it can be passed as the parser argument to
   XML_ExternalEntityParserCreate.  The systemId argument is the
   system identifier as specified in the entity declaration; it will
   not be NULL.

   The base argument is the system identifier that should be used as
   the base for resolving systemId if systemId was relative; this is
   set by XML_SetBase; it may be NULL.

   The publicId argument is the public identifier as specified in the
   entity declaration, or NULL if none was specified; the whitespace
   in the public identifier will have been normalized as required by
   the XML spec.

   The context argument specifies the parsing context in the format
   expected by the context argument to XML_ExternalEntityParserCreate;
   context is valid only until the handler returns, so if the
   referenced entity is to be parsed later, it must be copied.

   The handler should return 0 if processing should not continue
   because of a fatal error in the handling of the external entity.
   In this case the calling parser will return an
   XML_ERROR_EXTERNAL_ENTITY_HANDLING error.

   Note that unlike other handlers the first argument is the parser,
   not userData.
*/
typedef int (*XML_ExternalEntityRefHandler)(XML_Parser parser,
                                            const XML_Char *context,
                                            const XML_Char *base,
                                            const XML_Char *systemId,
                                            const XML_Char *publicId);

/* This is called in two situations:
   1) An entity reference is encountered for which no declaration
      has been read *and* this is not an error.
   2) An internal entity reference is read, but not expanded, because
      XML_SetDefaultHandler has been called.
   Note: skipped parameter entities in declarations and skipped general
         entities in attribute values cannot be reported, because
         the event would be out of sync with the reporting of the
         declarations or attribute values
*/
typedef void (*XML_SkippedEntityHandler)(void *userData,
                                         const XML_Char *entityName,
                                         int is_parameter_entity);

/* This structure is filled in by the XML_UnknownEncodingHandler to
   provide information to the parser about encodings that are unknown
   to the parser.

   The map[b] member gives information about byte sequences whose
   first byte is b.

   If map[b] is c where c is >= 0, then b by itself encodes the
   Unicode scalar value c.

   If map[b] is -1, then the byte sequence is malformed.

   If map[b] is -n, where n >= 2, then b is the first byte of an
   n-byte sequence that encodes a single Unicode scalar value.

   The data member will be passed as the first argument to the convert
   function.

   The convert function is used to convert multibyte sequences; s will
   point to a n-byte sequence where map[(unsigned char)*s] == -n.  The
   convert function must return the Unicode scalar value represented
   by this byte sequence or -1 if the byte sequence is malformed.

   The convert function may be NULL if the encoding is a single-byte
   encoding, that is if map[b] >= -1 for all bytes b.

   When the parser is finished with the encoding, then if release is
   not NULL, it will call release passing it the data member; once
   release has been called, the convert function will not be called
   again.

   Expat places certain restrictions on the encodings that are supported
   using this mechanism.

   1. Every ASCII character that can appear in a well-formed XML document,
      other than the characters

      $@\^`{}~

      must be represented by a single byte, and that byte must be the
      same byte that represents that character in ASCII.

   2. No character may require more than 4 bytes to encode.

   3. All characters encoded must have Unicode scalar values <=
      0xFFFF, (i.e., characters that would be encoded by surrogates in
      UTF-16 are  not allowed).  Note that this restriction doesn't
      apply to the built-in support for UTF-8 and UTF-16.

   4. No Unicode character may be encoded by more than one distinct
      sequence of bytes.
*/
typedef struct {
  int map[256];
  void *data;
  int (*convert)(void *data, const char *s);
  void (*release)(void *data);
} XML_Encoding;

/* This is called for an encoding that is unknown to the parser.

   The encodingHandlerData argument is that which was passed as the
   second argument to XML_SetUnknownEncodingHandler.

   The name argument gives the name of the encoding as specified in
   the encoding declaration.

   If the callback can provide information about the encoding, it must
   fill in the XML_Encoding structure, and return 1.  Otherwise it
   must return 0.

   If info does not describe a suitable encoding, then the parser will
   return an XML_UNKNOWN_ENCODING error.
*/
typedef int (*XML_UnknownEncodingHandler)(void *encodingHandlerData,
                                          const XML_Char *name,
                                          XML_Encoding *info);

XMLPARSEAPI(void)
XML_SetElementHandler(XML_Parser parser,
                      XML_StartElementHandler start,
                      XML_EndElementHandler end);

XMLPARSEAPI(void)
XML_SetStartElementHandler(XML_Parser, XML_StartElementHandler);

XMLPARSEAPI(void)
XML_SetEndElementHandler(XML_Parser, XML_EndElementHandler);

XMLPARSEAPI(void)
XML_SetCharacterDataHandler(XML_Parser parser,
                            XML_CharacterDataHandler handler);

XMLPARSEAPI(void)
XML_SetProcessingInstructionHandler(XML_Parser parser,
                                    XML_ProcessingInstructionHandler handler);
XMLPARSEAPI(void)
XML_SetCommentHandler(XML_Parser parser,
                      XML_CommentHandler handler);

XMLPARSEAPI(void)
XML_SetCdataSectionHandler(XML_Parser parser,
                           XML_StartCdataSectionHandler start,
                           XML_EndCdataSectionHandler end);

XMLPARSEAPI(void)
XML_SetStartCdataSectionHandler(XML_Parser parser,
                                XML_StartCdataSectionHandler start);

XMLPARSEAPI(void)
XML_SetEndCdataSectionHandler(XML_Parser parser,
                              XML_EndCdataSectionHandler end);

/* This sets the default handler and also inhibits expansion of
   internal entities. These entity references will be passed to the
   default handler, or to the skipped entity handler, if one is set.
*/
XMLPARSEAPI(void)
XML_SetDefaultHandler(XML_Parser parser,
                      XML_DefaultHandler handler);

/* This sets the default handler but does not inhibit expansion of
   internal entities.  The entity reference will not be passed to the
   default handler.
*/
XMLPARSEAPI(void)
XML_SetDefaultHandlerExpand(XML_Parser parser,
                            XML_DefaultHandler handler);

XMLPARSEAPI(void)
XML_SetDoctypeDeclHandler(XML_Parser parser,
                          XML_StartDoctypeDeclHandler start,
                          XML_EndDoctypeDeclHandler end);

XMLPARSEAPI(void)
XML_SetStartDoctypeDeclHandler(XML_Parser parser,
                               XML_StartDoctypeDeclHandler start);

XMLPARSEAPI(void)
XML_SetEndDoctypeDeclHandler(XML_Parser parser,
                             XML_EndDoctypeDeclHandler end);

XMLPARSEAPI(void)
XML_SetUnparsedEntityDeclHandler(XML_Parser parser,
                                 XML_UnparsedEntityDeclHandler handler);

XMLPARSEAPI(void)
XML_SetNotationDeclHandler(XML_Parser parser,
                           XML_NotationDeclHandler handler);

XMLPARSEAPI(void)
XML_SetNamespaceDeclHandler(XML_Parser parser,
                            XML_StartNamespaceDeclHandler start,
                            XML_EndNamespaceDeclHandler end);

XMLPARSEAPI(void)
XML_SetStartNamespaceDeclHandler(XML_Parser parser,
                                 XML_StartNamespaceDeclHandler start);

XMLPARSEAPI(void)
XML_SetEndNamespaceDeclHandler(XML_Parser parser,
                               XML_EndNamespaceDeclHandler end);

XMLPARSEAPI(void)
XML_SetNotStandaloneHandler(XML_Parser parser,
                            XML_NotStandaloneHandler handler);

XMLPARSEAPI(void)
XML_SetExternalEntityRefHandler(XML_Parser parser,
                                XML_ExternalEntityRefHandler handler);

/* If a non-NULL value for arg is specified here, then it will be
   passed as the first argument to the external entity ref handler
   instead of the parser object.
*/
XMLPARSEAPI(void)
XML_SetExternalEntityRefHandlerArg(XML_Parser, void *arg);

XMLPARSEAPI(void)
XML_SetSkippedEntityHandler(XML_Parser parser,
                            XML_SkippedEntityHandler handler);

XMLPARSEAPI(void)
XML_SetUnknownEncodingHandler(XML_Parser parser,
                              XML_UnknownEncodingHandler handler,
                              void *encodingHandlerData);

/* This can be called within a handler for a start element, end
   element, processing instruction or character data.  It causes the
   corresponding markup to be passed to the default handler.
*/
XMLPARSEAPI(void)
XML_DefaultCurrent(XML_Parser parser);

/* If do_nst is non-zero, and namespace processing is in effect, and
   a name has a prefix (i.e. an explicit namespace qualifier) then
   that name is returned as a triplet in a single string separated by
   the separator character specified when the parser was created: URI
   + sep + local_name + sep + prefix.

   If do_nst is zero, then namespace information is returned in the
   default manner (URI + sep + local_name) whether or not the name
   has a prefix.

   Note: Calling XML_SetReturnNSTriplet after XML_Parse or
     XML_ParseBuffer has no effect.
*/

XMLPARSEAPI(void)
XML_SetReturnNSTriplet(XML_Parser parser, int do_nst);

/* This value is passed as the userData argument to callbacks. */
XMLPARSEAPI(void)
XML_SetUserData(XML_Parser parser, void *userData);

/* Returns the last value set by XML_SetUserData or NULL. */
#define XML_GetUserData(parser) (*(void **)(parser))

/* This is equivalent to supplying an encoding argument to
   XML_ParserCreate. On success XML_SetEncoding returns non-zero,
   zero otherwise.
   Note: Calling XML_SetEncoding after XML_Parse or XML_ParseBuffer
     has no effect and returns zero.
*/
XMLPARSEAPI(int)
XML_SetEncoding(XML_Parser parser, const XML_Char *encoding);

/* If this function is called, then the parser will be passed as the
   first argument to callbacks instead of userData.  The userData will
   still be accessible using XML_GetUserData.
*/
XMLPARSEAPI(void)
XML_UseParserAsHandlerArg(XML_Parser parser);

/* If useDTD == XML_TRUE is passed to this function, then the parser
   will assume that there is an external subset, even if none is
   specified in the document. In such a case the parser will call the
   externalEntityRefHandler with a value of NULL for the systemId
   argument (the publicId and context arguments will be NULL as well).
   Note: If this function is called, then this must be done before
     the first call to XML_Parse or XML_ParseBuffer, since it will
     have no effect after that.  Returns
     XML_ERROR_CANT_CHANGE_FEATURE_ONCE_PARSING.
   Note: If the document does not have a DOCTYPE declaration at all,
     then startDoctypeDeclHandler and endDoctypeDeclHandler will not
     be called, despite an external subset being parsed.
   Note: If XML_DTD is not defined when Expat is compiled, returns
     XML_ERROR_FEATURE_REQUIRES_XML_DTD.
*/
XMLPARSEAPI(enum XML_Error)
XML_UseForeignDTD(XML_Parser parser, XML_Bool useDTD);


/* Sets the base to be used for resolving relative URIs in system
   identifiers in declarations.  Resolving relative identifiers is
   left to the application: this value will be passed through as the
   base argument to the XML_ExternalEntityRefHandler,
   XML_NotationDeclHandler and XML_UnparsedEntityDeclHandler. The base
   argument will be copied.  Returns zero if out of memory, non-zero
   otherwise.
*/
XMLPARSEAPI(int)
XML_SetBase(XML_Parser parser, const XML_Char *base);

XMLPARSEAPI(const XML_Char *)
XML_GetBase(XML_Parser parser);

/* Returns the number of the attribute/value pairs passed in last call
   to the XML_StartElementHandler that were specified in the start-tag
   rather than defaulted. Each attribute/value pair counts as 2; thus
   this correspondds to an index into the atts array passed to the
   XML_StartElementHandler.
*/
XMLPARSEAPI(int)
XML_GetSpecifiedAttributeCount(XML_Parser parser);

/* Returns the index of the ID attribute passed in the last call to
   XML_StartElementHandler, or -1 if there is no ID attribute.  Each
   attribute/value pair counts as 2; thus this correspondds to an
   index into the atts array passed to the XML_StartElementHandler.
*/
XMLPARSEAPI(int)
XML_GetIdAttributeIndex(XML_Parser parser);

/* Parses some input. Returns XML_STATUS_ERROR if a fatal error is
   detected.  The last call to XML_Parse must have isFinal true; len
   may be zero for this call (or any other).

   The XML_Status enum gives the possible return values for the
   XML_Parse and XML_ParseBuffer functions.  Though the return values
   for these functions has always been described as a Boolean value,
   the implementation, at least for the 1.95.x series, has always
   returned exactly one of these values.  The preprocessor #defines
   are included so this stanza can be added to code that still needs
   to support older versions of Expat 1.95.x:

   #ifndef XML_STATUS_OK
   #define XML_STATUS_OK    1
   #define XML_STATUS_ERROR 0
   #endif

   Otherwise, the #define hackery is quite ugly and would have been dropped.
*/
enum XML_Status {
  XML_STATUS_ERROR = 0,
#define XML_STATUS_ERROR XML_STATUS_ERROR
  XML_STATUS_OK = 1
#define XML_STATUS_OK XML_STATUS_OK
};

XMLPARSEAPI(enum XML_Status)
XML_Parse(XML_Parser parser, const char *s, int len, int isFinal);

XMLPARSEAPI(void *)
XML_GetBuffer(XML_Parser parser, int len);

XMLPARSEAPI(enum XML_Status)
XML_ParseBuffer(XML_Parser parser, int len, int isFinal);

/* Creates an XML_Parser object that can parse an external general
   entity; context is a '\0'-terminated string specifying the parse
   context; encoding is a '\0'-terminated string giving the name of
   the externally specified encoding, or NULL if there is no
   externally specified encoding.  The context string consists of a
   sequence of tokens separated by formfeeds (\f); a token consisting
   of a name specifies that the general entity of the name is open; a
   token of the form prefix=uri specifies the namespace for a
   particular prefix; a token of the form =uri specifies the default
   namespace.  This can be called at any point after the first call to
   an ExternalEntityRefHandler so longer as the parser has not yet
   been freed.  The new parser is completely independent and may
   safely be used in a separate thread.  The handlers and userData are
   initialized from the parser argument.  Returns 0 if out of memory.
   Otherwise returns a new XML_Parser object.
*/
XMLPARSEAPI(XML_Parser)
XML_ExternalEntityParserCreate(XML_Parser parser,
                               const XML_Char *context,
                               const XML_Char *encoding);

enum XML_ParamEntityParsing {
  XML_PARAM_ENTITY_PARSING_NEVER,
  XML_PARAM_ENTITY_PARSING_UNLESS_STANDALONE,
  XML_PARAM_ENTITY_PARSING_ALWAYS
};

/* Controls parsing of parameter entities (including the external DTD
   subset). If parsing of parameter entities is enabled, then
   references to external parameter entities (including the external
   DTD subset) will be passed to the handler set with
   XML_SetExternalEntityRefHandler.  The context passed will be 0.

   Unlike external general entities, external parameter entities can
   only be parsed synchronously.  If the external parameter entity is
   to be parsed, it must be parsed during the call to the external
   entity ref handler: the complete sequence of
   XML_ExternalEntityParserCreate, XML_Parse/XML_ParseBuffer and
   XML_ParserFree calls must be made during this call.  After
   XML_ExternalEntityParserCreate has been called to create the parser
   for the external parameter entity (context must be 0 for this
   call), it is illegal to make any calls on the old parser until
   XML_ParserFree has been called on the newly created parser.
   If the library has been compiled without support for parameter
   entity parsing (ie without XML_DTD being defined), then
   XML_SetParamEntityParsing will return 0 if parsing of parameter
   entities is requested; otherwise it will return non-zero.
   Note: If XML_SetParamEntityParsing is called after XML_Parse or
      XML_ParseBuffer, then it has no effect and will always return 0.
*/
XMLPARSEAPI(int)
XML_SetParamEntityParsing(XML_Parser parser,
                          enum XML_ParamEntityParsing parsing);

/* If XML_Parse or XML_ParseBuffer have returned 0, then
   XML_GetErrorCode returns information about the error.
*/
XMLPARSEAPI(enum XML_Error)
XML_GetErrorCode(XML_Parser parser);

/* These functions return information about the current parse
   location.  They may be called when XML_Parse or XML_ParseBuffer
   return 0; in this case the location is the location of the
   character at which the error was detected.

   They may also be called from any other callback called to report
   some parse event; in this the location is the location of the first
   of the sequence of characters that generated the event.
*/
XMLPARSEAPI(int) XML_GetCurrentLineNumber(XML_Parser parser);
XMLPARSEAPI(int) XML_GetCurrentColumnNumber(XML_Parser parser);
XMLPARSEAPI(long) XML_GetCurrentByteIndex(XML_Parser parser);

/* Return the number of bytes in the current event.
   Returns 0 if the event is in an internal entity.
*/
XMLPARSEAPI(int)
XML_GetCurrentByteCount(XML_Parser parser);

/* If XML_CONTEXT_BYTES is defined, returns the input buffer, sets
   the integer pointed to by offset to the offset within this buffer
   of the current parse position, and sets the integer pointed to by size
   to the size of this buffer (the number of input bytes). Otherwise
   returns a NULL pointer. Also returns a NULL pointer if a parse isn't
   active.

   NOTE: The character pointer returned should not be used outside
   the handler that makes the call.
*/
XMLPARSEAPI(const char *)
XML_GetInputContext(XML_Parser parser,
                    int *offset,
                    int *size);

/* For backwards compatibility with previous versions. */
#define XML_GetErrorLineNumber   XML_GetCurrentLineNumber
#define XML_GetErrorColumnNumber XML_GetCurrentColumnNumber
#define XML_GetErrorByteIndex    XML_GetCurrentByteIndex

/* Frees memory used by the parser. */
XMLPARSEAPI(void)
XML_ParserFree(XML_Parser parser);

/* Returns a string describing the error. */
XMLPARSEAPI(const XML_Char *)
XML_ErrorString(enum XML_Error code);

/* Return a string containing the version number of this expat */
XMLPARSEAPI(const XML_LChar *)
XML_ExpatVersion(void);

typedef struct {
  int major;
  int minor;
  int micro;
} XML_Expat_Version;

/* Return an XML_Expat_Version structure containing numeric version
   number information for this version of expat.
*/
XMLPARSEAPI(XML_Expat_Version)
XML_ExpatVersionInfo(void);

/* Added in Expat 1.95.5. */
enum XML_FeatureEnum {
  XML_FEATURE_END = 0,
  XML_FEATURE_UNICODE,
  XML_FEATURE_UNICODE_WCHAR_T,
  XML_FEATURE_DTD,
  XML_FEATURE_CONTEXT_BYTES,
  XML_FEATURE_MIN_SIZE,
  XML_FEATURE_SIZEOF_XML_CHAR,
  XML_FEATURE_SIZEOF_XML_LCHAR
  /* Additional features must be added to the end of this enum. */
};

typedef struct {
  enum XML_FeatureEnum  feature;
  XML_LChar            *name;
  long int              value;
} XML_Feature;

#ifndef __SYMBIAN32__
XMLPARSEAPI(const XML_Feature *)
XML_GetFeatureList(void);
#endif


/* Expat follows the GNU/Linux convention of odd number minor version for
   beta/development releases and even number minor version for stable
   releases. Micro is bumped with each release, and set to 0 with each
   change to major or minor version.
*/
#define XML_MAJOR_VERSION 1
#define XML_MINOR_VERSION 95
#define XML_MICRO_VERSION 5

#ifdef __cplusplus
}
#endif

#endif /* not XmlParse_INCLUDED */

---